Bundle & save · limited offer

Your mask is 50% off when you bundle it with this machine.

Build your full setup below — machine, mask & consumables shipped together, all genuine and authorised.

1/1 required
ResMed AirFit F20
ResMed
ResMed AirFit F20
$84.00$168.00
ResMed AirFit F20 for Her
ResMed
ResMed AirFit F20 for Her
$84.00$168.00
ResMed AirFit N20
ResMed
ResMed AirFit N20
$84.00$168.00
ResMed AirFit F30i
ResMed
ResMed AirFit F30i
$82.50$165.00
ResMed AirFit N20 Classic
ResMed
ResMed AirFit N20 Classic
$84.00$168.00
ResMed AirFit N20 for Her
ResMed
ResMed AirFit N20 for Her
$84.00$168.00
One size
ResMed AirFit N30i QuietAir Starter Pack
ResMed
ResMed AirFit N30i QuietAir Starter Pack
$84.00$168.00
ResMed AirFit P10
ResMed
ResMed AirFit P10
$84.00$168.00
One size
ResMed AirFit P10 for Her
ResMed
ResMed AirFit P10 for Her
$84.00$168.00
One size
ResMed AirFit P30i Starter Pack
ResMed
ResMed AirFit P30i Starter Pack
$82.99$165.99
ResMed AirTouch N20 Starter Kit (includes 2 spare cushions, one already attached to mask)
ResMed
ResMed AirTouch N20 Starter Kit (includes 2 spare cushion...
$82.49$164.99
ResMed Airfit N30 Nasal CPAP Mask (Multi Cushion Pack)
ResMed
ResMed Airfit N30 Nasal CPAP Mask (Multi Cushion Pack)
$84.50$169.00
One size
ResMed Airsense 10 ClimateLineAir Heated Tube
ResMed
ResMed Airsense 10 ClimateLineAir Heate...
$48.00
ResMed CPAP SlimLine tubing
ResMed
ResMed CPAP SlimLine tubing
$15.99
Philips Respironics DreamStation 15MM Heated Tube
Philips Respironics
Philips Respironics DreamStation 15MM H...
$65.00
ResMed S9 ClimateLine Heated Tubing
ResMed
ResMed S9 ClimateLine Heated Tubing
$38.99
Fisher & Paykel SleepStyle ThermoSmart AirSpiral Heated Breathing Tube
Fisher & Paykel
Fisher & Paykel SleepStyle ThermoSmart ...
$78.00
ResMed AirSense 11  ClimateLineAir ROW
ResMed
ResMed AirSense 11 ClimateLineAir ROW
$75.00
Pick a mask to start saving.
$4,088.00
ResMed | SKU: 28125
In stock — ships today
Save $3,212

ResMed Lumis 150 VPAP ST 4G with Built-in Wireless Connectivity, HumidAir and ClimateLineAir

Bilevel ventilator (VPAP ST) with HumidAir & ClimateLineAir


$4,088.00$7,300.00$3,212 OFF RRP
or 4 interest-free payments of $1,022 with afterpay zip PayPal
Usually same-day dispatch
On orders placed before 1pm ACST, Mon–Fri

Estimated delivery
  • South Australia — usually 1 business day
  • Sydney, Melbourne & major cities — 2–3 business days
  • Regional & remote areas may take a little longer
Standard & Express options at checkout. Free shipping over $200.
Pre-configure your machine — free
Send your sleep-study summary or pressure settings and we'll set up your machine before dispatch. Send prescription →
Note: there's no legal Rx requirement to buy a CPAP in Australia, but pressure settings should come from a clinician.

Genuine ResMed
TGA-regulated
Lowest price guarantee
Talk to a consultant
Bettina Karin Drew
Not sure if this is the right machine?
Chat with an Aussie CPAP consultant · usually replies in 2 min
Chat

The Lumis 150 VPAP ST is an advanced noninvasive ventilator crafted for patients with obstructive or restrictive lung conditions who are not reliant on ventilation support.

Featuring ResMed’s unique volume assurance mode – iVAPS (intelligent Volume – Assured Pressure Support) – Lumis 150 VPAP ST maintains target alveolar ventilation to suit each patient’s changing needs. It is designed to maintain preset target alveolar ventilation by monitoring delivered ventilation, adjusting the pressure support and providing backup breath spontaneously.

Highlighted by ResMed machine's exclusive volume-assurance mode, iVAPS (intelligent Volume-Assured Pressure Support), the Lumis 150 VPAP ST ensures consistent alveolar ventilation tailored to individual patient requirements. Additionally, equipped with an intelligent Backup Rate (iBR) and optional AutoEPAP, iVAPS continuously monitors ventilation and upper airway conditions.

With user-friendly setup and operation, this ventilator also integrates seamlessly with AirView™, ResMed's cloud-based patient management system, through built-in wireless connectivity, facilitating convenient remote monitoring.

Inclusions

1 x ResMed Lumis 150 VPAP ST Device 

1 x HumidAir™ Heated Humidifier Tub 

1 x ClimateLineAir™ Heated Tubing 

1 x Power Supply Unit 

1 x Carry Bag 

1 x Standard Filter 

1 x User Manual 

1 x SD Card 

2 Year Manufacturer Warranty + 3 Year FREE Extended Manufacturer Warranty (activate HERE) 

PRODUCT INFORMATION

Manufacturer

ResMed

In The Package

ResMed Lumis 150 VPAP ST - CPAP machine, built-in humidair humidifier, standard humidifier chamber, climateline heated tube, universal power supply with cord, travel bag, starter filter, filter cover, sd data card, printed users manual.

Part Number(S)

28125 (Airsense 10 Autoset with heated humidifier & climateline tubing)

Warranty

2 years

Modes

CPAP, S, T, ST with optional iBR, PAC, iVAPS with iBR and optional AutoEPAP

Operating pressure range

2–25 cm H2O (2–25 hPa) in S, T, ST, PAC and iVAPS modes

4–20 cm H2O (4–20 hPa) in CPAP mode

Sound pressure level

High leak, low minute ventilation, apnoea, non-vented mask and low SpO₂ (when an oximeter is connected)

Dimensions (H x W x D)

116 mm x 205 mm x 150 mm (Device only)

116 mm x 255 mm x 150 mm (Device with HumidAir humidifier)

Weight

1106 g (Device only)

1268 g (Device with HumidAir humidifier)

90W power supply unit

Input range: 100–240V, 50–60Hz, 57VA (typical power consumption)

108VA (peak power consumption)

Operating temperature/humidity/altitude

+5°C to +35°C / 10–95% relative humidity, non-condensing

Sea level to 2,591 m

Air pressure range 1013 hPa to 738 hPa

Storage and transport temperature/humidity

-20°C to +60°C / 5–95% relative humidity, non-condensing

Housing construction

Flame retardant engineering thermoplastic

Supplemental oxygen

Recommended maximum flow: 15 L/min (CPAP, S, T, ST, PAC) 4 L/min (iVAPS)

Standard air filter

Polyester non-woven fibre

Tubing

SlimLine™ and ClimateLineAir (15 mm)

Standard (19 mm)

Air outlet

22 mm air outlet complies with ISO 5356-1:2004

Electromagnetic compatibility

Requirements (EMC) according to IEC60601-1-2:2007 for residential, commercial, and light industry environments

Aircraft use

ResMed confirms that device meets the Federal Aviation Administration (FAA) requirements (RTCA/DO-160, section 21, category M) for all phases of air travel

IEC 60601-1: 2006 classification

Class II (double insulation), Type BF Ingress protection IP22

Warranty Notes: Warranty applies to primary item. accessory and parts warranties 90 days. review manufacturer's documentation for full details.

Resources:

Lumis series brochure

ManufacturerResMed
In The PackageResMed Lumis 150 VPAP ST - CPAP machine, built-in humidair humidifier, standard humidifier chamber, climateline heated tube, universal power supply with cord, travel bag, starter filter, filter cover, sd data card, printed users manual.
Part Number(S)28125 (Airsense 10 Autoset with heated humidifier & climateline tubing)
Warranty2 years
ModesCPAP, S, T, ST with optional iBR, PAC, iVAPS with iBR and optional AutoEPAP
Operating pressure range2–25 cm H2O (2–25 hPa) in S, T, ST, PAC and iVAPS modes 4–20 cm H2O (4–20 hPa) in CPAP mode
Sound pressure levelHigh leak, low minute ventilation, apnoea, non-vented mask and low SpO₂ (when an oximeter is connected)
Dimensions (H x W x D)116 mm x 205 mm x 150 mm (Device only) 116 mm x 255 mm x 150 mm (Device with HumidAir humidifier)
Weight1106 g (Device only) 1268 g (Device with HumidAir humidifier)
90W power supply unitInput range: 100–240V, 50–60Hz, 57VA (typical power consumption) 108VA (peak power consumption)
Operating temperature/humidity/altitude+5°C to +35°C / 10–95% relative humidity, non-condensing Sea level to 2,591 m Air pressure range 1013 hPa to 738 hPa
Storage and transport temperature/humidity-20°C to +60°C / 5–95% relative humidity, non-condensing
Housing constructionFlame retardant engineering thermoplastic
Supplemental oxygenRecommended maximum flow: 15 L/min (CPAP, S, T, ST, PAC) 4 L/min (iVAPS)
Standard air filterPolyester non-woven fibre
TubingSlimLine™ and ClimateLineAir (15 mm) Standard (19 mm)
Air outlet22 mm air outlet complies with ISO 5356-1:2004
Electromagnetic compatibilityRequirements (EMC) according to IEC60601-1-2:2007 for residential, commercial, and light industry environments
Aircraft useResMed confirms that device meets the Federal Aviation Administration (FAA) requirements (RTCA/DO-160, section 21, category M) for all phases of air travel
IEC 60601-1: 2006 classificationClass II (double insulation), Type BF Ingress protection IP22
1 x ResMed Lumis 150 VPAP ST Device
1 x HumidAir™ Heated Humidifier Tub
1 x ClimateLineAir™ Heated Tubing
1 x Power Supply Unit
1 x Carry Bag
1 x Standard Filter
1 x User Manual
1 x SD Card

Empty the humidifier tub each morning and wipe down weekly with CPAP-safe wipes. Replace the air filter every 30 days. Mask cushions every 1–3 months, tubing every 6 months — Subscribe & Save makes it automatic.

Warranty. Full manufacturer warranty applies — see the Specifications above for this device's warranty period.

Returns. Change-of-mind returns within 30 days for unused, unopened items; opened or used machines may incur a 30% processing fee (see our returns policy). Faulty or major-failure items are covered under the Australian Consumer Law.

Questions & answers

Frequently asked

No — there's no legal prescription requirement to buy a CPAP in Australia. Your pressure settings should come from a sleep study, though. Upload your prescription and we'll pre-configure the machine free before dispatch.
It uses standard 22mm tubing, so it works with virtually any standard CPAP mask. See the compatible masks above, or use our Mask Finder.
Complete your setup

Often bought together

ResMed Lumis 150 VPAP ST 4G with Bu...
$4,088.00$7,300.00