The Lumis 150 VPAP ST is an advanced noninvasive ventilator crafted for patients with obstructive or restrictive lung conditions who are not reliant on ventilation support.
Featuring ResMed’s unique volume assurance mode – iVAPS (intelligent Volume – Assured Pressure Support) – Lumis 150 VPAP ST maintains target alveolar ventilation to suit each patient’s changing needs. It is designed to maintain preset target alveolar ventilation by monitoring delivered ventilation, adjusting the pressure support and providing backup breath spontaneously.
Highlighted by ResMed machine 's exclusive volume-assurance mode, iVAPS (intelligent Volume-Assured Pressure Support), the Lumis 150 VPAP ST ensures consistent alveolar ventilation tailored to individual patient requirements. Additionally, equipped with an intelligent Backup Rate (iBR) and optional AutoEPAP, iVAPS continuously monitors ventilation and upper airway conditions.
With user-friendly setup and operation, this ventilator also integrates seamlessly with AirView™, ResMed's cloud-based patient management system, through built-in wireless connectivity, facilitating convenient remote monitoring.
Inclusions
1 x ResMed Lumis 150 VPAP ST Device
1 x HumidAir™ Heated Humidifier Tub
1 x ClimateLineAir™ Heated Tubing
1 x Power Supply Unit
1 x Carry Bag
1 x Standard Filter
1 x User Manual
1 x SD Card
2 Year Manufacturer Warranty + 3 Year FREE Extended Manufacturer Warranty (activate HERE)
PRODUCT INFORMATION
| Manufacturer | |
| In The Package | Resmed Lumis 150 VPAP ST - CPAP machine , built-in humidair humidifier, standard humidifier chamber, climateline heated tube, universal power supply with cord, travel bag, starter filter, filter cover, sd data card, printed users manual. |
| Part Number(S) | 28125 (Airsense 10 Autoset with heated humidifier & climateline tubing) |
| Warranty | 2 years |
| Modes | CPAP, S, T, ST with optional iBR, PAC, iVAPS with iBR and optional AutoEPAP |
| Operating pressure range | 2–25 cm H2O (2–25 hPa) in S, T, ST, PAC and iVAPS modes 4–20 cm H2O (4–20 hPa) in CPAP mode |
| Sound pressure level | High leak, low minute ventilation, apnoea, non-vented mask and low SpO₂ (when an oximeter is connected) |
| Dimensions (H x W x D) | 116 mm x 205 mm x 150 mm (Device only) 116 mm x 255 mm x 150 mm (Device with HumidAir humidifier) |
| Weight | 1106 g (Device only) 1268 g (Device with HumidAir humidifier) |
| 90W power supply unit | Input range: 100–240V, 50–60Hz, 57VA (typical power consumption) 108VA (peak power consumption) |
| Operating temperature/humidity/altitude | +5°C to +35°C / 10–95% relative humidity, non-condensing Sea level to 2,591 m Air pressure range 1013 hPa to 738 hPa |
| Storage and transport temperature/humidity | -20°C to +60°C / 5–95% relative humidity, non-condensing |
| Housing construction | Flame retardant engineering thermoplastic |
| Supplemental oxygen | Recommended maximum flow: 15 L/min (CPAP, S, T, ST, PAC) 4 L/min (iVAPS) |
| Standard air filter | Polyester non-woven fibre |
| Tubing | SlimLine™ and ClimateLineAir (15 mm) Standard (19 mm) |
| Air outlet | 22 mm air outlet complies with ISO 5356-1:2004 |
| Electromagnetic compatibility | Requirements (EMC) according to IEC60601-1-2:2007 for residential, commercial, and light industry environments |
| Aircraft use | ResMed confirms that device meets the Federal Aviation Administration (FAA) requirements (RTCA/DO-160, section 21, category M) for all phases of air travel |
| IEC 60601-1: 2006 classification | Class II (double insulation), Type BF Ingress protection IP22 |
Warranty Notes: Warranty applies to primary item. accessory and parts warranties 90 days. review manufacturer's documentation for full details.
Resources: