For many sleep apnea patients, traveling off the power grid can create problems with maintaining therapy. Philips Respironics developed the DreamStation Go overnight battery. DreamStation Go's battery can help you stick to your therapy schedule. The DreamStation Go is set to 10 centimeters of pressure. It can run for about 13 hours* on the Dreamstation Go battery.
Note : The battery may not last as long if you use higher CPAP pressure settings, if your mask is leaking, if you are at a high altitude or a low temperature, if you are charging your device with a USB port, or if you are using other devices.
Here are the conditions of the PAP run-time test: The settings for the CPAP machine are as follows:
- Pressure: 10 centimeters of water (cm H2O)
- Tubing: 12 millimeters (mm)
- Flow rate: 37 liters per minute (LPM) of leak
- Temperature: 73.4 degrees Fahrenheit (°F) in the room, which is located at an elevation of 1,650 feet (ft)
Specification
| Compatibility | PAP System: DreamStation Go CPAP, AutoPAP |
| Battery Pack | 1133281 |
| Warranty | 1 year |
| Weight | 696g (1.53lb) |
| Output voltage | 18-24.6 VDC |
| Battery technology | Lithium Ions |
| Input Voltage Range | 100-240 VAC, 50/60Hz, 2.0- 1.0A |
| Output power | 50W |
| Run time | 8 hours |
| Minimum life cycle | 500 cycles |
| Recharge time | 5 hours |